Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
STORAGE
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collec-
FAILURE REMOVAL
Failures
Engine does not start
garden waste is not collected
device does not shred satisfactorily
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Components for which there are no instructions for
exchanging should be replaced by the manufacturer only.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
unauthorised use.
Let the engine cool down, before you store the device in
a closed room.
ting/recycling point. By doing so, plastic and metal parts
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.
Causes
No power supply.
overload protection has responded
Safety switch on the collection box
not locked in position
shredded material is too soft
device is blocked
chopping knife runs backwards
Pressure plate is not adjusted
correctly
EN
Removal
Check the socket outlet, cable, line
and plug, and carry out repairs by a
qualified electrician if necessary
wait until motor has cooled down,
press reset switch and switch on
again
Place the collection container in the
correct position and lock it in place
work with a pusher or dry twigs/
branches for shredding
clear the blockage, see picture
description
Change the direction of rotation
Adjust the pressure plate
ENGLISH
17
Publicidad
