Publicidad
Idiomas disponibles
Idiomas disponibles
5. CONNECTION
5.1. Power supply
The device has a 100-240Vac 50/60 Hz power supply input that allows the
connection to the mains by means of the supplied cable (CEE7 Male / C13
Female, 1.8m).
5.2. IP Connection
Use the ETH A port (RJ45 connector) and Cat 5e FTP cable to connect the
device to the IP network.
Connection to
Ethernet switch
5.3. IP Connection in installations with redundant
Ethernet network
In installations with network redundancy, use the ETH A and ETH B ports
(RJ45 connectors).
Ethernet connection
to switch 1
MO2-700ETH 5.2.02 Version
MO2-700ETH
Ethernet connection
to switch 2
IP receiver with one music
output and one paging output
Figure 3
Figure 4
Figure 5
R+D Department
8
Publicidad
