Symbols Used In The Manual; Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual - Fimap FM33 Manual De Uso Y Mantenimiento

Tabla de contenido

Idiomas disponibles

The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time

to elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements.

The reproduction, even partial, of the text and drawings contained in this document is prohibited by law.

The company reserves the right to make any technical and/or supply modifications. The images are shown as a reference only, and

are not binding as to the actual design and/or equipment.

Open book symbol with an "i":

Indicates the need to consult the instruction manual.

Open book symbol:

Tells the operator to read the manual before using the appliance.

Covered place symbol:

the operations preceded by this symbol must always be carried out in a dry, covered area.

Warning symbol:

Carefully read the sections marked with this symbol and observe the indications, for the safety of the operator and the

appliance.

Warning symbol that the carriage is moving:

Indicates that the packed product should be handled with suitable lifting means that comply with the legal requirements.

Explosion risk symbol:

indicates that the battery may explode in certain conditions, if not handled in accordance with the directives indicated in

the manufacturer's manual.

The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, most appropriate and most

autonomous way. It includes information concerning technical aspects, safety, operation, appliance downtime, maintenance, spare parts and

scrapping. Operators and qualified technicians must read the instructions in this manual carefully before carrying out any operation on the

appliance. If in doubt about the correct interpretation of instructions, contact your nearest Customer Service Centre to obtain the necessary

clarifications.

This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must not perform operations

that should be carried out by qualified technicians. FIMAP S.p.A. cannot be held liable for damages resulting from failure to comply with this

prohibition.

The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected from liquids and anything else that

could compromise its legibility.

When the machine is delivered to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping

documents has been received, in addition to verifying that the equipment has not been damaged during transportation. If this is the case, the

carrier must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the

missing material can be obtained, and compensation for damage successfully claimed.

Any type of equipment can only work properly and effectively if used correctly and kept in full working order by performing the maintenance

operations described in the attached documentation. You should therefore read this instruction manual carefully, consulting it again if

difficulties should arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with our

dealers) is always available for advice or direct intervention.