Parkside Performance PAPS 208 A1 Traduccion Del Manual De Instrucciones Originale página 45

4. On the
lect the option „Add
device".
The app scans the
area for available
devices and indi-
cates if available
devices have been
found.
If this is not the
case, read on
if possible
5. If you select „Go to
add", the available
devices are dis-
played in a list.
6. Select the battery
by setting the check
mark
one device at a
time. If there are oth-
er check marks for
other devices, clear
the check marks by
pressing them.
7. Now press the
tab, se-

.
. Select only
,
that has the same
colour as the set
check mark.
8. Confirm the success-
ful connection with
„Finish".
The battery is now
listed in the
and can be selected.

If you have already
connected other devic-
es to the app:
4. On the tab
lect the
per right. The app
scans the area for
available devices
and indicates if
available devices
have been found.
If this is not the
case, read on
if possible
5. Proceed as with
from point 5.
GB MT
tab
, se-
in the up-

.

45