Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
When using walk-assist mode, the bike will move
at a constant speed of 2.5 mph (4 km/h). The walk-
assist symbol will be displayed on the screen.
ONLY ACTIVATE WALK-ASSIST MODE WHEN
WALKING ON A SLOPE. MOUNTING OR RIDING
THE PRODUCT WHILE IN WALK-ASSIST MODE
CAN INCREASE THE RISK OF INJURY DUE TO
POTENTIAL LOSS OF BALANCE.
•
Release the walk-assist button to disengage the
walk-assist mode.
4.5
SHIFT GEARS
Note: The gear system comprises a network of levers,
guides, and tension pulleys that facilitate the movement
of the drive chain between the 7 sprockets located
at the rear wheel. Its primary function is to help you
maintain a consistent and smooth pedaling rhythm
across different terrains, reducing the effort required
when cycling uphill or downhill.
Note: Do not shift derailleur gears when you are
stopped. For a smooth gear change when approaching
a hill, shift to a lower gear before your pedaling speed
slows down too much. When coming to a stop, shift to a
lower gear first so it will be easier when you start riding
again. For optimal performance and extended chain
life, it is recommended that you avoid using extreme
combinations of gear positions for extended periods.
Pedaling
Operation
state
English (Original Instructions)
mile
WARNING
Pedaling be-
Push lever to shift through each of the
comes lighter
gears (i.e. 5 to 4).
Rear sprocket shifts from smaller to
larger (i.e. 5th to 4th).
Pedaling be-
Push the button to shift through each of
comes heavi-
the gears (i.e. 4 to 5).
er
Rear sprocket shifts from a larger to
smaller (i.e. 4th to 5th).
Note: To change gears, you must be pedaling forward.
14
3 4
5 6
7
2
1
4
5
5 6
3 4
7
2
1
4
5
Publicidad
