Publicidad
Idiomas disponibles
Idiomas disponibles
4.6
STOP THE PRODUCT
1. Release the throttle and squeeze the brake lever to
stop the product.
Note: When coming to a complete stop, place both
feet on the ground to balance the product.
2. If ride is complete, press and hold the on/off button
to power off.
3. Insert the key, turn it clockwise to the UNLOCK
position and remove the cover.
4. Remove the battery from battery box by pushing the
battery release button.
5. Rotate the key to the UNLOCK position and hold it
in place. Align the cover with the battery box and
push it firmly along the ribs until it locks into place.
6. Withdraw the key to remove it from the lock.
English (Original Instructions)
5
DISPLAY SETTINGS
Note: Set the parameters only when the product is
stopped.
5.1
DISPLAY INTERFACE SWITCH
1. Press the on/off button to turn on the display,
which shows the real-time speed (mph) and the trip
distance (mile) by default.
2. Press the parameter setting button to toggle the
display interface between the trip distance (mile),
ODO (mile), maximum speed (mph) and average
speed (mph).
15
EN
Publicidad
