Publicidad
Idiomas disponibles
Idiomas disponibles
The glass jug can be removed and you can pour a cup of coffee at any time.
The anti-spill system temporarily stops the dripping. The glass jug should be
replaced on the hotplate within 30 seconds to prevent spillage.
Coffee machine with glass jug
Once the brew cycle has run (approximately one minute after the coffee has finished
dripping), remove the glass jug to pour a mug of coffee. If you don't want to serve the
coffee immediately, leave the coffee machine switched on. The coffee will be kept warm on
the hotplate. However, for the best coffee taste, we recommend that the coffee is served
straight after brewing. The coffee machine will switch off automatically after 40 minutes.
Coffee machine with insulated jug
The quantity of coffee brewed will be less than the quantity of water added, this
is because some of the water is absorbed by the coffee grounds and it sticks
to the plastic.
Once the brew cycle has run (approximately one minute after the coffee has finished
dripping), remove the jug to pour a cup of coffee.
After pouring your coffee, or if you do not wish to serve immediately, do not place the
insulated jug back into the coffee machine. The anti-drip system will maintain the jug in open
position and the coffee will not be kept hot. In order for the coffee to remain hot after
dripping, the insulated jug must be removed and placed on the counter top, for example.
Do not open the cover when the coffee is brewing.
•
Steam and scalding water may be ejected: burn
risk!
The glass jug gets hot when the appliance is in
•
use. Only pick it up by the handle. Do not touch
the hot surfaces of the appliance.
Always switch off the coffee machine and unplug
•
the power cord when not in use.
16
V.1.0
using the device
Delayed start
(programmable coffee machines only)
•
Plug the coffee machine into a mains socket. Prepare the water tank and coffee.
•
Set the timer by following Steps 1 to 3 in the "Setting the clock" section.
•
Start preparing the coffee machine following Steps 1 to 4 in the "Preparing the coffee"
section.
Set the delayed start functionality as follows:
1.
Press the "PROG" button once. The "PROG" light flashes green.
2.
Use the hours and minutes keys to set the desired delayed start time.
3.
After having set the delayed start time, press on "PROG". The "PROG" light turns solid
green. After a few seconds, the LCD screen indicates the current time.
The delayed start function can be cancelled by pressing on the "PROG" button
a second time. If you want to change the delayed start time, only repeat Steps 2
and 3 above.
4.
Once the desired time has been set, the ON/OFF light turns solid green. Once the delayed
start time has been reached, it turns red and the device starts brewing.
The timer cannot be adjusted when the appliance is in use, or when the delayed
start function has been set.
•
If there is a power outage or you unplug the appliance, the timer program will not be
saved.
•
You can program a delayed start up to 24 hours in advance.
17
V.1.0
using the device
Publicidad
