Casselin CRBCTV300 Manual página 14

device if it is malfunctioning, and do not use spare parts that are not original.
ELECTRICAL DANGER
Risk linked to electric current!
If incorrectly installed, the device may be dangerous and cause injury. Before any installation, check the
electrical network data. Plug in the device only when it complies. The device must be unpacked and checked
completely before connection by a professional.
5.2 Use
WARNING
The installation of the device and maintenance should only be carried out by professionals.
• Do not leave the device running without monitoring it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging and the protections must be completely removed.
Place the device on a solid, stable, flat and non-flammable surface.
Do not place the device against a wall.
Do not install the device near open fires or other heating devices.
It is prohibited to place flammable objects on or near the device.
Make sure that all ventilation openings are not blocked.
Make sure the device is positioned for optimal use.
Clean the tank and the wheel using hot water and a clean cloth then dry the elements with a soft, dry cloth
(Carry out these operations with the appliance unplugged (isolated from all electrical sources).
The device must be electrically protected upstream with an appropriate safety device.
The device must be plugged directly into a wall outlet and not into a power strip.
USE
Install the appliance on a vertical toaster. To do this, you must first remove the plate holding the baking sheet.
Install your baking sheet as indicated on the instructions for your toaster and secure it using the butter wheel.
Plug the device directly into your toaster. Turn the knob until you obtain the desired temperature. The
temperature can be selected up to 90°C.
When the temperature drops, the device starts heating again.
Once the temperature is reached, slide the bread onto the wheel so that the melted butter settles on its
surface.
WARNING: the butter is hot or even burning depending on the selected temperature!
NOTICED
The device has an automatic safety system in case of overheating. If triggered, unplug the device and allow
it to cool. If this protection system activates regularly, it is imperative to contact your dealer.
6. CLEANING AND MAINTENANCE
6.1 Safety instructions
Any maintenance, cleaning or repair of the device must be carried out with the device unplugged (isolated
from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not penetrate inside
FR