5. Position thehandlebar asshown,
ensuring thehandlebar isposi-
tioned o nthehandlebar clamp be-
tween t hearrows o nthehandlebar
decal.
6. Retighten handlebar byturning
clamp knob clockwise until h andle-
barissecure a nd stationary in
clamp (clamp k nob cannot beover-
tightened).
KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTIONMANUALAND SAFETY RULES BEFORE OPERATING YOUR
EDGER ATTACHMENT. Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual
for future reference.
Depth Adjustment
Knob
Gearbox
Wheel
Tube
J
Hanger
Blade Shield
BLADE
The BLADE is designed to cut sod.
Edger Blade
DEPTH ADJUSTMENT
KNOB
The DEPTH ADJUSTMENT KNOB is
usedtoa_ustthe
wheel_rbladecut-
tingdepth.
OPERATING THE COUPLER
Your powerhead
is equipped with a
coupler which enables optional attach-
ments to be installed.
The optional
attachments
are:
Cultivator ............
358.792410
Blower ..............
358.792421
Brushcutter
..........
358.792441
I_ WARNING:
Always disconnect
powerhead
spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or instal-
ling attachments,
place the power-
head and attachment
on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Upper Tube
Coupler
Lower
Attachment
TIGHTEN
Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
/
Lower Attachment
Upper Tube
3. While securely holding the upper
tube, pull the attachment straight
out of the coupler.
7