Maintenance Schedule - Sears Craftsman professional 247.889360 Manual Del Operador

MAINTENANCE S CHEDULE
WARNING
Before performing any type of maintenance/service,
disengage all controls and stop the engine. Wait until
all moving parts have come to a complete stop.
Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear
safety glasses during operation or while performing
any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes
service guidelines only. Use the Service Log column to keep track of
completed maintenance tasks. To locate the nearest Sears Service
Center or to schedule service, simply contact Sears at
1-800-4-MY-HOME®.
Interval Service Log
Each Use
1.
2.
3.
4.
5.
6.
7.
1st 5 hours 1.
40 hours
Before Storage
1.
2.
3.
4.
5.
Item Service
Mower Blades 1. As required
Loose or missing hardware 2. Tighten or replace
Belts 3. Check
Engine oil level 4. Check
Fuel level 5. Check
Controls 6. Check for proper orientation
Cutter Blade Spindle Bearings 7. Lubricate
Engine oil 1. Change
Engine oil 1. Change
Air cleaner 2. Clean or replace
Mower blades 3. Sharpen and balance
Spark plug 4. Clean, replace, re-gap
Follow lubrication chart 5. Lubricate
• Fuel System 1. Run engine until it stops from
lack of fuel or add a gasoline
additive to the gas in the tank.
23