Descargar Imprimir esta página

Craftsman 917.28948 Manual Del Operador página 10

Ocultar thumbs Ver también para 917.28948:

Publicidad

Idiomas disponibles

Idiomas disponibles

4.
Slide mower under tractor.
Bring
belt forward
and check
belt for
proper routing in all mower pulley grooves.
NOTE:
Be sure
mower
side
suspension
arms (A) are pointing forward
before sliding
mower under tractor.
Slide
mower
under
tractor
until
it is
centered
under tractor.
5. Install anti-sway bar (S) (If equipped)
90 ° End
Anti-Sway
Bar (S)
Towards'_.t_
Mower Deck""
Integrated Washer End
,
From
right
side
of mower,
first
insert
90 ° end of anti-sway
bar (S) into hole in
transaxle
bracket
(T), located
near left
rear tire in front of transaxte.
NOTE:
Flashlight
may be helpful.
Anti-Sway Bar
il
s_ _ .
(s)
Location
/
Transaxle Bracket (T)
Located Between Rear Tires
NOTE: Depending
on model, bracket (T) may
be different than shown but hole for anti-sway
bar will be in same position/location.
o
Pivot the integrated
washer end of anti-
sway bar (S) towards mower deck bracket
on right side of mower. Insert integrated
washer end of bar into hole in rear mower
bracket
(D). Move mower as needed to
insert integrated
washer
end of bar into
rear mower bracket
(D).
Secure
with
small
washer
and small
retainer
spring
as shown°
)
c
D, Right Side Rear
Mower Bracket
S. Anti-Sway Bar
T. Transaxle Bracket
6,
Attach
mower
side suspension
arms
(A) to chassis.
Position front hole in side suspension
arm
(A) over pin on outside of tractor chassis
and secure with large washer
and large
retainer
spring
(B),
Repeat on opposite
side of tractor.
A, Mower Side Suspension Arms
B° Retainer Spring
D. Right Side Rear Mower Bracket
7. Attach
rear lift links
(C)
Insert rod end of rear lift link (C) into hole
(U) in tractor
lift shaft suspension
arm
and pivot link down to mower,
Lift rearcorner
of mower and position slot
in link assembly
over pin on rear mower
bracket (D) and secure with large washer
and large retainer
spring,
Repeat on opposite
side of tractor_
'I0

Publicidad

loading