Craftsman 358.799701 Manual De Instrucciones página 5

3. Insert the notched end of the adapt-
er into elbow; push parts together
until the adapter snaps into place.
Notched End
Tube Release
/ / /
\"V Button Hote for /
:\f / tube re_ease /
; button _/
_BIower_utlet Adapter
4. Align the grooves on the adapter
with the grooves on the blower out-
let.
5. Push the adapter onto the blower
outlet until it snaps into place
(adapter is secured by tube release
button).
6. Proceed to ALL UNITS - TUBE AS-
SEMBLY.
ALL UNITS - TUBE ASSEMBLY
1. Push the slotted end of the pivot tube
over the elbow until the flange bot-
toms out in the elbow groove.
NOTE: Be sure flange snaps into groove.
2. Test rotating action of the pivot tube
by rotating the pivot tube right and
left.
3. Assemble extension tubes up to a
total of 4, depending on the height
of gutter to be cleaned.
4. Thread nozzle onto the last tube.
NOTE: Make sure threaded joints (tubes
and nozzle) are securely tightened.
5. Align the tube assembly in a vertical
position.
6. Thread extension tube assembly
onto the end of the pivot tube.
Pivot
Flange
Elbow Groove
Elbow
-5-