Know Your Pressure Washer - Briggs & Stratton GENERAC 2400PSI Manual Del Propietário

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spray Gun
Recoil Starter
Fuel Tank
Choke Knob
Throttle Control Lever
Air Filter
Adjustable Nozzle
Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
Air Filter — Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
Choke Knob — Prepares a cold engine for starting.
Fuel Tank — Fill tank with regular unleaded gasoline.
Always leave room for fuel expansion.
Generac Portable Products 2400 PSI Pressure Washer
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Oil Fill/Dipstick — Check and fill with oil here.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Control Lever — Sets engine in starting mode
for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
5
High Pressure Hose
Oil Fill/Dipstick
Water Inlet
High Pressure Outlet
Pump equipped with
Automatic Cool Down
System