Publicidad
Idiomas disponibles
Idiomas disponibles
CYCLE OPTION BUTTONS
Your washing machine features several additional cycle
EXTRA RINSE
options to customize cycles to meet your individual needs.
This option will add an extra rinse to the
Certain option buttons also feature a special function (see the
selected cycle. Use this option to help ensure
following page for details) that can be activated by pressing
the removal of detergent or bleach residue
and holding that option button for 3 seconds,
from fabrics.
To Add Cycle Options
to a Cycle:
_I
Turn on the washer and turn the cycle selector knob
to select the desired cycle.
_1 Use the cycle modifier buttons to adjust the settings
for that cycle.
OI Press the cycle option button(s) for the option you
would like to add. The button LED will light when that
option is selected.
0
Press the cycle selector knob to start the cycle. The
washer will start automatically after a brief delay for
locking the door.
STAIN CYCLE
0
Select this option for heavily stained clothes,
such as play clothes or work clothes. Stain
Cycle will add extra wash time to the selected
cycle, as well as an additional rinse cycle.
EASY SPIN
_;
EASY SPIN can be used to help reduce or
eliminate vibrations, especially on wood floor
installations.
NOTE: To protect your garments, not every wash/rinse
temperature, spin speed, soil level, or option is available
with every cycle. See the Cycle Guide for details.
Once you have selected the cycle and other
settings, press this button to delay the start of
the wash cycle. Each press of the button
increases the delay time by one hour, for up to
12 hours(796.4884*) and 13 hours(796.4885*).
PRE WASH
To activate EASY SPIN:
While the washing machine is running in any cycle, press
the EASY SPIN button.
The EASY SPIN button light will blink while the washer
is running to show that EASY SPIN is active. The EASY
SPIN function will remain active for every cycle, even after
a power failure.
To cancel EASY SPIN:
Press the EASY SPIN button to turn off the EASY SPIN
function.
Select this option to add a 16-minute prewash
to the chosen cycle. This is especially useful
for heavily soiled items.
To use the prewash option, follow the normal
loading and cycle selection instructions on the
previous page. Add 1/2 of the normal amount of detergent
to the prewash compartment
in the dispenser. Press the
prewash option button and then start the cycle.
NOTE: If the prewash option is being used, then
powdered detergent MUST be used in the main wash
compartment. See page 17.
20
Publicidad
