Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING
THE DRAIN HOSE
• The drain hose should always be properly secured.
Failure to properly secure the drain hose can result
in flooding and property damage.
• Do not install the end of the drain hose higher than
96 in. (244.8 cm) above the bottom of the washer.
• The drain must be installed in accordance with any
applicable local codes and regulations.
• Make sure that the drain hose is not stretched,
pinched, crushed, or kinked.
Option 1: Standpipe
F
Elbow Bracket
Tie
Strap
Drain Hose
J
The elbow bracket should be installed near the end of
the drain hose. Insert the end of the drain hose into the
standpipe. Use tie strap to secure the drain hose in place.
NOTE:
• Total height of the hose end should not exceed 96 in.
(244.8 cm) from the bottom of the washer.
• The drain hose should be inserted no more than 8-12
inches into the standpipe.
Option 2: Laundry
Tub
Elbow Bracket
Option 3: Floor Drain
f
DrainHose
Floor Drain
Insertthe end of the drain hose into the floor drain.
Secure the hose to prevent it from moving.
CONNECT
TO POWER SUPPLY
Washer should be plugged into a 120-VAC, 60-Hz.
grounded 3-prong outlet.
Plug in the washer.
J
Laund_ Tub
Tie Strap
Drain Hose
The elbow bracket should be installed near the end of the
drain hose. Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain hose in place.
10
Publicidad
