Fromm & Starck STAR PMW 07 Manual Del Usuario página 4

6
U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
PROJECTOR
Product name
MOUNT
Model STAR_PMW_07
The scope of the mount angle
-15° / +15°
adjustment (down/up)
The scope of the mount angle
-15° / +15°
adjustment (left/right)
Rotation angle 360°
Maximum load [kg] 10
Distance from ceiling [mm] 240-310
Dimensions (Width x Height)
340x240
[mm]
Weight [kg] 1,22
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
Only use indoors.
CAUTION! The figures in this manual are illustrative
only and may vary in some details from the actual
appearance of the product.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and
instructions. Failure to follow warnings and
instructions could result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to PROJECTOR MOUNT.
EN
2.1. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
e) Keep packaging elements and small assembly parts
in a place not available to children.
f) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.2. PERSONAL SAFETY
a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
b) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.3.SAFE DEVICE USE
a) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
b) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
c) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
d) Clean the device regularly to prevent stubborn grime
from accumulating.
e) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
f) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
g) Keep the device away from sources of fire and heat.
h) The maximum load of the product must not be
exceeded.
i) The surface to which the product will be attached
must be able to withstand the weight of the product
together with the device mounted on it.
j) Two people should install the product and the
projector on it. Dropping or improper handling of
the product and the device mounted on it may cause
equipment damage or injury to the installer.
k) Before drilling holes for wall plugs and driving screws
on the ceiling, make sure that these activities will not
damage any electrical cables.
l) The mounting surface should not be subjected to
vibration, displacement or impact.
EN
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is designed for ceiling mounting and holding
the projector in a set position.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
2
3
1
1. Projector mount
2. Ceiling bracket mount
3. Tilt adjustment screws and knob
7
A
B
C
D
E
F
G
3.2. PREPARING FOR USE
Required tools not included with the product: