Melchioni Family GLASS Manual De Instrucciones página 17

■
" ZERO " OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the
scale. Put first Load on the scale, get weight reading. Press
to reset the LCD reading to "0" before adding next load. You can repeat
this operation.
Condition 1: "ZERO" function
When total sum of all loads on scale
≤4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
LCD will show ----- or Og each time
is pressed. ----- means not stable,
please wait for a moment. Og and
meanwhile an icon o on the left side of
LCD mean ZERO function is activated.
Max. weight capacity remains
unchanged.
Condition 2: "TARE" function
When total sum of all loads on scale
>4% of scale's max.weight capacity.
(4%=80g when capacity is 2000g;
200g when capacity is 5000g)
LCD will show ----- or Og each time
is pressed. ----- means not stable,
please wait for a moment. Og and
meanwhile an icon T on the left corner
of LCD mean TARE function is
activated. Max. weight capacity is
reduced by total weight of all loads.
Under this condition
By pressing
weight of all loads on the scale.
If you want to weigh more loads, just
press
to reset LCD reading to '0' again.
16
button
you can see the total