Descargar Imprimir esta página

Craftsman 921.166390 Manual Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Symbols
The information listed below should be read and understood by the operator. This information is given to protect the
u_er while operating and storing the air compressor.We util_e the symbols below to allow the reader to recognize
imeortant infermation about their safety
Indicates
an imminentty
hazardous
situation which, if
net avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if net
avoided, could result in death or serious injury,
Indicates
a potentially
hazardous
situation which, if not
avoided,
may result in minor or moderate
injury.
When used without the safety alert symbol indicates
a potentialiy hazardous s[tu_L_enwinch, if not avoided,
may result in property damage,
Important
Safety Instructions
and Guidelines
• Save
all instructions
Improper
operation
or maintenance
of this product could
result in serious
injury
and/or
property
damage.
Read and
understand
all of the warnings
and safety instructions
provided before using this equipment.
Risk
of Moving
Parts
Risk of Burns
Risk of Falling
i
Risk from Flying Objects
The air compressor should be operated on a dedicated 15 amp circuit. If the circuit
does not have 15 free amps available, a larger circuit must be used. Always use
more air hose beiore utilizing extension cords. A!l extension cords used must be 12
gauge with a maximum length ol 25 ft. The circuit fuse type must be a time delay Low
voltage could cause damage to the motor.
If the air compressor
is in operation,
all guards and covers should
be attached or
installed
correctly. If any guard or cover has been damaged,
do not operate the
equipment
until the proper personnel
has correctly
repaired the equipment.
The power
cord should be free ef any moving parts, twisting and!or crimping
while in use and
while in storage.
There are sudaces on your air compressor
that while in operation
and thereafter
can
cause serious burns if touched. The equipment
should be allowed time to cool before
any maintenance
is attempted
Items such as the compressor
pump and the outlet
tube ere normally
hot during and after operation.
Operation ot the air compressor should always be in a position that is stable. Never
use the air compressor on a rooftop or elevated position that could allow the unit to fal!
or be tipped over. Use additional air hose for elevated jobs.
Always wear ANSI Z87.1 approved safety glasses with side shields when the air
compressor is in use. Turn off the air compressor and drain the air tank before
performing any type of maintenance or disassembly of the hoses or fittings. Never
point any nozzle or sprayer toward any part of the body or at other people or animals.

Publicidad

loading