Petique Apollo Manual De Uso página 7

Assembly
Installing/Removing the Rear Wheels
3.) • Install one rear wheel by sliding the axle into the hole of the wheel hub
until it clicks into place. (Fig. 3a) Repeat for the other wheel. Pull on the
wheels to ensure they are installed properly.
• To remove, push the release button on the rear wheel hub and pull the
wheel away from the stroller. (Fig. 3b)
Fig. 3a
Installing the Handlebar
4.) • Position the handlebar as shown onto the mounting bracket. (Fig. 4a)
• Squeeze the metal push buttons on the handlebar and push the
handlebar onto the mounting bracket until it clicks into place and
the buttons pop up through the holes. (Fig. 4b)
• Pull up on the handlebar to ensure it is securely attached.
Fig. 4a
| 5 |
Copyright © 2023, Petique, Inc., All Rights Reserved.
Metal Push
Buttons
To adjust-
Push up
or down
release
button
Fig. 3b
Fig. 4b