Publicidad
Idiomas disponibles
Idiomas disponibles
Werfen Sie die Taucheinheit nicht in den Haus-
müll!
English
General Safety Instructions
Read all warnings and instructions enclosed
with the router plunge base and the power
tool being used. Failure to observe the safety
and general instructions may result in electric
shock, fire and/or serious injury.
Save all safety and general instructions for future refer-
ence.
Product Description and
Specifications
Intended use
The router plunge base, together with the Bosch Ad-
vancedTrimRouter 18V-8 edge router, is intended for rout-
ing grooves, edges, profiles and elongated holes in wood,
plastic and light building materials while resting firmly on the
workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
AdvancedTrimRouter 18V-8
(2)
Router plunge base
(3)
Depth stop
(4)
Slide with index mark
(5)
Handle screw for depth stop
(6)
Base plate
(7)
Guide plate
(8)
Turret stop
(9)
Bushing for fine adjustment of routing depth
(10) Scale for fine adjustment of routing depth
(11) Scale for setting the routing depth
(12) Locking lever for plunge action
(13) Clamping lever
(14) Handle (insulated gripping surface)
(15) Wing bolt for the guide rods of the guide holder
(16) Guide holder
(17) Dust extraction adapter
(18) Screw for dust extraction adapter
Bosch Power Tools
(19) Parallel guide
(20) Guide rail 2 609 255 732
(21) Guide rail 1 600 Z00 005
(22) Chip protection
(23) Wing bolt of the guide holder
(24) Adapter for guide rail 1 600 Z00 005
(25) Dust extraction adapter
(26) Extraction hose
(27) Centring pin
(28) Guide bushing
(29) Hold-down device for guide bushing
(30) Pair of screw clamps
a) Accessories shown or described are not included with the
Technical data
Router plunge base
Article number
Base plate diameter
Weight according to EPTA-Pro-
cedure 01:2014
Fitting
u
Inserting the Edge Router into the Router Plunge
a)
Base (see figure A)
– Open the clamping lever (13) if it is closed.
– Push the edge router (1) as far as it will go into the router
– Close the clamping lever (13).
u
Dust/Chip Extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
– Provide good ventilation at the workplace.
a)
a)
a)
a)
a)
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
plunge base (2).
After assembly, always check that the edge router (1)
is secure in the router plunge base (2).
terial wherever possible.
1 609 92A 8WV | (14.06.2023)
English | 9
Router Plunge Base
1 600 A02 W3Y
mm
144
kg
1.3
Publicidad
