Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Open the transport locking screw
3. Connect the air-hydraulic pedal pump to the compressed air supply.
Note
The compressed air supply must be equipped with a maintenance unit consisting of a
water separator, lubricator and pressure reducer.
4. Check all functions of the air-hydraulic pedal pump.
2.4
Before commissioning
Warning
Before commissioning, check all fastening screws, electrical, pneumatic and hydraulic lines
and tighten them if necessary.
Caution: Some of these must be checked at regular intervals and tightened if necessary.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
1
by turning the screw counterclockwise.
Release date: 16.11.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
49
Publicidad
