Publicidad
Idiomas disponibles
Idiomas disponibles
Choose the right tool for the job. Do not use a tool to do a job for which it was not designed. Do not force a
low-powered tool to do heavy work. Do not use a tool to do work for which it was not designed; for example,
do not use a circular saw to cut branches from a tree or logs.
PERSONAL SAFETY
Clothing
Do not wear loose clothing or jewellery, as these can be drawn into moving parts.
Hair
Long hair should be tied back and kept in a protective head covering.
Eye protection
The use of safety glasses is imperative (normal glasses are insufficient and do not provide effective eye
protection)
Hearing protection
It is recommended to use hearing protection during prolonged use.
Footwear
If there is a risk that a heavy object will injure your feet or that you will slip on a wet or slippery floor, you
must wear non-slip protective footwear.
Head protection
If there is a risk of falling objects or your head hitting a low or protruding obstacle, you should wear a helmet.
Take care of the power cable
Never pull or jerk the power cable to disconnect it from an outlet. Never carry a power tool by its power cable.
Keep the power cable away from heat sources, oils, solvents and sharp objects. If the power cord is damaged,
have it replaced by an authorized service centre.
Do not attempt to reach hard-to-reach places
Do not attempt to reach hard-to-reach places. Always maintain a stable footing and good balance.
Maintain your tools carefully
Follow the instructions for lubrication and replacement of accessories.
Inspect the tool's power cable regularly. If it is damaged, have it replaced by an authorised repair centre.
Inspect the extension cord regularly. If it is damaged, replace it.
Keep the handles clean, dry and free of oil and grease.
Make sure that the air vents are always clean and free of dust. If the air vents are blocked, the motor may
become hot and damaged.
Unplug power tools
Be sure to unplug the power tool when not in use, before servicing, lubricating or adjusting it, and before
changing its accessories (e.g. blades, bits and knives)
Remove adjusting and tightening keys
Avoid accidental starting of the tool
Make sure the switch is in the off position before plugging in the power tool
Extension cords and reels
Publicidad
