Goldstar M1804R Manual Del Propietário página 7

How to Connect a Drain Hose,
ho, at hetheo, coo it, ooo ooi ii I ':"'
Select a drain method according to the foilowing _ DRAIN PiPE
1. Remove the hole rubber from the base-pan (for _me models)
2. Connect a drain hose of 9/,, inside diameter to the drain pipe _ _t, DRAf[.4 HOSE
as shown in Fig. 1, ,,
3. Or connect a pipe elbow of %,' inside diameter to the drain _ Fig. 2
pipe' then c°nneot a drain h°se °' 9/'_' inside diameter t° the (1_1
pipe elbow as shown in Fig. 2. DRAIN ELBOW
_re and Maintenan_ F ORA,NHOSE
TURN THE AIR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET
Air Filter Cleaning
The air filter should be checked at least twice a month to see if cleaning is necessary.
Trapped particles in the filter will build up and block the airflow. This reduces the cooling
capacity and also causes an accumulation of frost on the cooling coils.
1. Open the inlet grille upward by pulling out the bosom of the inlet gdlle.(a)
in another case, you can open the inlet grille downward by pulling out the top of the inlet
grille.(b)
2. Remove the air filter from the front gdlle assembly by pulling the air filter up or down
slightly.
3. Wash the filter using lukewarm water below 40_ (104_).(c)
4. Gently shake the excess water from the filter completely. Replace the filter.
(_
NOTE: Mark A of inlet grille means opening direction.
How to Attach Front Grille to Cabinet
(b) (c)
1. Pull down front grille from the cabinet
top
2. Push front grilWs tips toward the cabinet
in order to insert front grille's tabs into
the cabinet
3_ Open the inlet grille.
4 Tighten the screw through the front grille
into the plate of the evaporator.
5 Close inlet grille.