Publicidad
Idiomas disponibles
Idiomas disponibles
NAME OF PARTS AND OPERATION SELECTOR SWITCH
NOTE
This illustration is based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner which
you have selected.
This air conditioner consists of an indoor unit and an outdoor unit. You
can control the air conditioner with the remote control unit.
INDOOR UNIT
OPERATION lamp
TIMER lamp
STANDBY lamp
COOL / DRY / HEAT Model Only
1. Remote control unit.
2. Sensor: Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Air outlet : distributes filtered and treated air into the room.
4. Air inlet : room air is sucked in through filters.
5. Receiver : receives signals transmitted from the remote control.
6. Flexible drain tube: removes condensate.
INDOOR UNIT
5
4
1
OUTDOOR UNIT
8
OPERATION lamp
TIMER lamp
COOL / DRY Model Only
7. Refrigerant tubes: convey refrigerant between the indoor
and outdoor unit.
8. Operation selector.
ON Position:
In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
OFF Position:
Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
3
3
2
6
7
5
EG
Publicidad
