Preparation (cont.)
Carefully lift the lavatory into place on the hanger and pedestal, and
slowly move the pedestal as required to ensure proper fit in the
desired location.
NOTE: The lavatory must be supported by the hanger and pedestal.
Level the lavatory, and add additional self-adhesive gaskets as
needed to level.
Locate the two lavatory anchoring holes, and mark the hole
locations on the finished wall. Now mark the floor through the hole
in the pedestal bottom.
Carefully remove the lavatory from the hanger and pedestal. Then
move the pedestal from the area.
1015595-2-A
All manuals and user guides at all-guides.com
4
Kohler Co.