Lutron Homeworks HR-REP-230-EU Instrucciones De Montaje página 3

System Communications
Note: Multiple repeaters may be necessary to provide adequate coverage. Up to five (5) Hybrid Repeaters (RF and
Wired combined) may be used with each 8 Series
Repeater Link).
Repeater Placement Example 1
Wireless Tabletop
Keypad
Processor
(8 Series
shown)
Hybrid Repeater Link –
305 m (1000 ft.) maximum
Repeater Placement Example 2
HomeWorks Processor
®
(8 Series shown)
9 m (30 ft.)
maximum*
Hybrid Repeater Link
305 m (1000 ft.) maximum
wire length per run
RF Communications Notes
• Hybrid Repeaters must be located within 9 m (30 ft.)* of the system devices they are covering.
• Hybrid Repeaters must also be within 18 m (60 ft.)* of another repeater (when using more than 1).
Wired Communications Notes
• Hybrid Repeater Link wiring must be in a daisy chain configuration.
• The total length of any single wire run on the Hybrid Repeater Link may be up to 305 m (1000 ft.). If the wire run is
broken with an RF hop (see Example 2), a subsequent wire run can be started that can be an additional 305 m
(1000 ft.).
*See Important Notes: RF Performance (page 1).
Processor or 4 Series
TM
9 m (30 ft.) maximum*
Hybrid Repeater
18 m (60 ft.) maximum*
between Repeaters
9 m (30 ft.) maximum*
Wireless Tabletop Keypad
(optional)
9 m (30 ft.)
maximum*
18 m (60 ft.)
maximum*
Processor (equipped with Hybrid
TM
Wireless Tabletop Keypad
Hybrid Repeater
Wireless Tabletop Keypad
9 m (30 ft.)
maximum*
Hybrid Repeater Link
305 m (1000 ft.) maximum wire length per run
3