BIG ASS FANS HAIKU L Guia De Instalacion página 22

FAN INSTALLATION
13. Secure wiring cover
Slide wiring cover up the downrod, aligning yellow arrow stickers so that top of wiring
cover sits flush with mounting bracket. Make sure all wires and the safety cable are
tucked into wiring cover, and then twist wiring cover clockwise to lock (Fig. 13.1).
Fig. 13.1
Wiring Cover
Removing the wiring cover
If you need to remove the wiring cover, use a long, thin object such as a small Allen
wrench or pen tip to press the recessed tab on the wiring cover (Fig. 13.2). While
pressing the tab, turn the cover counterclockwise (Fig. 13.2) and slide down to remove
(Fig. 13.3).
Fig. 13.2
20
Fig. 13.3
Wiring Cover