BIG ASS FANS HAIKU L Guia De Instalacion página 4

☑ Turn Off Power at Breaker
Contact an electrician if you are uncomfortable
performing electrical work. A licensed electrician
must install the fan if required by local code.
☑ Gather Tools
☑ Prepare Fan Site and Gather Hardware
Do not use the fan with a dimmer switch or a third-party switch.
Outlet Box: Make sure your outlet box is suitable for fan support. If there is not an
outlet box at the fan location, install one on a ceiling joist or beam. You will need to
supply two 10-32 screws for attaching the fan mounting bracket to the outlet box.
Concrete Ceiling: You will need to supply four M6 anchor bolts* for attaching the
fan mounting bracket to the ceiling. If required by your local building and safety
codes, you will also need to supply an M6 anchor hook* for the safety cable. See
page 4 for hardware specifications and installation details.
Wood Ceiling Joist: You will need to supply two corrosion-resistant 12-11 x 45 mm
hex head timber screws with seal for attaching the fan mounting bracket directly to
the joist. If required by local code, mount or embed an outlet box into the joist. The
outlet box must be suitable for fan support.
Exposed Outdoor Locations**: Wet-rated fans installed in exposed outdoor
locations must have fixed/permanent coverage above the fan wiring cover, must
be installed in a GFCI protected branch circuit, and can be mounted to flat ceilings
only.
*If anchor bolts and anchor hook are included with your fan, use them for concrete mounting.
**When installing the fan in an exposed outdoor location, use only light kits marked "Suitable for Use in
Wet Locations."
2
BEFORE YOU START
CAUTION