JONR XQ02E Manual Del Usuario página 13

C. Cleaning after use
1) Self-cleaning of machine body pipes and roller brush
a. After use, please promptly put the machine back into the
charging stand for charging, and step on the self-cleaning
switch to start self-cleaning; step on the self-cleaning switch
again to stop self-cleaning.
b. After self-cleaning is complete, the machine will automatically
enter charging state.
Tips
1. Before self-cleaning, make sure there is
sufficient water in the clean water tank.
2. Please pay attention to avoid foreign
objects touching the self-cleaning switch,
so as to avoid accidentally starting the
self-cleaning function.
2) Clean the wastewater tank
Remove the
wastewater
tank
Product Summary
Self-cleaning switch
Clean the
wastewater
tank
10
EN
Reinstall the
wastewater
tank