JONR XQ02E Manual Del Usuario página 15

1. In order to avoid affecting the performance of the machine, it is recommended to
regularly clean and maintain the machine body, floor brush, dirt suction port,
wastewater tank, etc.
2. Before cleaning, turn off the machine, then wipe the body with a cloth or neutral
detergent. Note that the cloth should be wrung out to prevent water stains from leaking
into the machine.
3. Wastewater tank cleaning: clean the wastewater tank after each use of the machine
(can be washed with a cleaning brush), and regularly clean the upper cover and filter of
the wastewater tank.
Remove the upper cover
4. Cleaning the sprinkler ports and roller brush
▶
Clean the sprinkler ports regularly according to the usage conditions, to avoid
accumulation of stains and scaling from affecting the water outlet.
▶ Clean and dry the roller brush regularly after disassembly to avoid long-term
dampness and odor.
Remove the brush cover
After cleaning surface hair and
debris with a cleaning brush, wash
with water and leave to air
Tips
In order to ensure maximum cleaning performance, please replace the roller brush and
HEPA element regularly. It is recommended to replace it every 6 months under normal use.
Maintenance and Repair
After removing the filter, wash
with clean water and dry
Rinse the brush cover
Install the roller brush and
push it firmly into place
☼
12
Replacement of HEPA
element in filter
Pull out the roller brush
in direction of arrow
Install the roller
brush cover
EN