cecotec READYWARM 4000 THERMAL CERAMIC CONNECTED Manual De Instrucciones página 26

ENGLISH
Warning
If the device is disconnected from the power supply, the schedule settings will be saved
but the current day and time will be reset.
Function settings
1. Press the mode button to select the desired mode or programme.
Fig. 6.
2. Press (+) or (-) to select the temperature.
- Icon 7. Comfort mode: Temperature setting 5 ºC-35 ºC.
- Icon 8. ECO mode: Temperature setting 1.5 ºC-31.5 ºC, 3.5 ºC less than Comfort mode.
- Icon 9. Anti-frost mode: 7 ºC for room temperature. Temperature cannot be adjusted.
Selecting and setting programmes
- With the programme P1, P2 and P3 default settings, the programme can be adjusted
according to the user's needs.
- Press the mode button to choose a programme. Once the programme is selected, press
the OK button to adjust it.
Icon 14. means icon 7, Comfort mode;
Icon 18. means icon 8, ECO mode;
Icon 19 means icon 9, Anti-frost mode.
Note
The block next to the clock corresponding to the programme will blink when it is running.
P1 (Day programme)
1. When P1 is selected, press the OK button once. The P1 symbol and the first time symbol
(icon 13) will blink.
2. Press the mode button to chose the each hour's mode and use (+) and (-) to move the
blinking hour symbol (icon 14) until the 24-hour mode setting is completed.
3.
Press the OK button to confirm the 24-hour setting and exit the programme setting.
P2 (Weekdays and weekends)
1. When P2 is selected, press the OK button once. The P2 symbol and the first time symbol
(icon 13) will blink.
2.
Press the mode button to chose the each hour's mode and use (+) and (-) to move the
blinking hour symbol (icon 14) until the 24-hour mode setting is completed.
3.
Press the OK button to confirm the 24-hour setting, and switch from the weekday
programme (1,2,3,4,5) to the weekend programme setting (6,7).
4. When the setting is complete, press the OK button to confirm and exit.
READYWARM 4000 / 6000 / 8000 THERMAL CERAMIC CONNECTED
26