VEVOR SKF-B40F Manual De Instrucciones página 5

equipped with a three-prong plug mated with standard three-prong wall
outlets to minimize the possibility of electric shock.
17.Plug your appliance into a dedicated, properly installed, and grounded
wall outlet. Do not, under any circumstance power and /or grounding
should be directed toward a certified electrician.
18.The foaming materials inside are combustible which must be kept away
from fire.
19.It's forbidden to pull the cable to unplug the plug, pull the plug is a must.
IMPORTANCE: To avoid hazards due to instability,the unit must be placed
on an even and flat surface.
IMPORTANCE: To avoid hazards due to instability,the unit must be placed
on an even and flat surface.
WARNING: This appliance must be grounded.
1)The fuse on the PCB is 15A,if change,must be operated by a technician.
2)voltage fluctuation can't be exceeded ±10% than the rated voltage,or a
Voltage stabilizer is needed.
IMPORTANCE: To avoid hazards due to instability, the unit must be
placed on an even and flat surface.
OPERATING PROCEDURES
UNPACKING YOUR ICE MAKER
1.Remove all exterior and interior packaging materials. Check whether all
the below accessories are included or not. If any parts are missing, please
contact our customer service. After you unpack the machine, we
recommend you to leaving it for 24 hours before turning it on.
2.Clean the interior with lukewarm water and a soft cloth or clean the unit
using the Self-Clean function.
3.Find a location for your ice maker where it's protected from direct sunlight
and other sources of heat (i.e. stove, furnace, radiator). Place the ice
maker on a level surface. Make sure that there is at least 5 inches of space
between the back and sides of your ice maker and the wall.
4.Allow one hour for the refrigerant to settle before plugging the unit for
- 4 -