Connect drainage pipe and water intake pipe
Warning:1)The machine can only connect with drinking water sources,and
must meet local drinking water standards
2)The water pressure must be in 0.1-0.4Mpa,if exceed 0.4Mpa,a pressure
reducing valve must be connected.
3)Drainage: The outlet of the drainage pipe must be lower than the outlet
on the machine
Drain.
Warning: Because the ice in the inner tank will melt, drain pipe must be
connected before using, and insert the drain pipe into a container or into
the sewer.
Note: Connect one end of the drain pipe to the machine, and the other end
to a container or sewer. The other port of the drain pipe must be lower than
the drain port of the machine.
- 7 -