ChiQ CCD415NEI4E Manual Del Usuario página 7

-18.0 ℃, and the Care+ space is set at the Vegetables function by default, which ensures that foods are stored in
a better temperature range, with the refrigerator operating with better efficiency and performance.
When the ECO function is active, the fridge temperature， freezer temperature and Care+ temperature are subject
to no change.
2）To enter "ECO".
Press the "Function" key until the icon of ECO starts flickering, and then press the "OK" key within 5 seconds to
validate the setting, with the icon of "ECO" normally On.
3） To exit "ECO".
·
When the ECO function is active, press the "Function" key until the icon of ECO gets flickering, and then press
the "OK" key within 5 second to validate the setting to get the ECO function disabled, with the icon of "ECO"
extinguished and the temperature of each compartment restored to that that is set before the ECO function is
enabled (not in the functional state).
·
When the Fast-Freezing function is enabled, the ECO function gets exited automatically.
1.3 Fast Freezing
1) When the fast-freezing function is enabled, cooling down the freezer temperature in a rapid manner is good for the
prevention against food nutrition loss and the preservation of freshness. The fast-freezing function also provides users
with two optional modes, namely "Fast freezing" and "Deep freezing".
When the fast-freezing function is active, the freezer temperature is subject to no change.
2) To enter "Fast freezing".
 "Fast freezing" mode: Press the "Function" key until the icon of "Fast freezing" gets flashing, and then press the
"Ok" key to validate the function. When the "Freezer" key is pressed at this time, the remaining time of fast
freezing is displayed to be "6H".

"Deep freezing" mode: Under the "Fast freezing" mode, press and hold the "Freezer" key for more than 3s, then
the "Deep freezing" function can be enabled, with the freezer temperature displayed to be "-32.0" and 3 quick
sounds issued by the buzzer.
3) To exit "Fast Freezing".

After the fast-freezing function is enabled, the refrigerator will operate according to the setting. After the
countdown ends, the icon of "Fast freezing" light off, with the freezer temperature restored to the set
temperature before the fast-freezing function is enabled. The details are as follows:
"Fast freezing" mode: It will automatically get exited after 6 hours, which is suitable for the short-term storage of
frozen food in small amounts.
"Deep freezing" mode: It will automatically exit after 26 hours, under which, the refrigerator tries to cool down
the freezer temperature at the maximum capacity allowed by the current environment. It is suitable for the
long-term storage of frozen food in large amounts.

Under the "Fast freezing" or "Deep freezing" mode, press the "Function" key, then the icon of "Fast freezing"
starts flashing; At this time, press the "OK" key, the "Fast freezing" or "Deep freezing" mode gets exited.

When the ECO function gets enabled, the fast-freezing function will be disabled automatically.
1.4 Child Lock
When the Child Lock function is enabled, the temperature and function are subjected to no change to prevent
maloperation.
1）In case of no key operation within 3 minutes, the Child Lock function will be enabled automatically.
2）Exiting the Child Lock function manually
The Child Lock function can be disabled when you press and hold down the OK (3s to Unlock) key for 3s.
1.5 Door open alarm
If the fridge door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped
when any key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted until
the fridge door is closed.
1.6 Power cut memory
In the case of power failure, the refrigerator will maintain the running state that is set before the power outage when the
power supply is restored.
1.7 Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not be started immediately after it is powered on.
1.8 Over-temperature alarm (Only after the power outage)
When energized, if the freezer sensor temperature is higher than -10℃, its corresponding icon and temperature gets
flickering. The temperature of the freezer when it is energized can be displayed by pressing any key. And the normal
display is restored 10s later or by pressing any key again.
EN