Flow Switch - filtreau BSONE-EVO-10 Manual De Usuario

If chlorination is carried out with the cover in place, when it is
removed, the pool should not be used straightaway. It is better to
wait ½ hour for any vapours between the water and cover to
dissipate.
Note: Password "1234" is required to modify this function.

4.1.4.7 Flow switch

The flow sensor detects whether or not there is water flow in the piping. If it
detects that there is no flow, the production will stop, and an alarm will sound
accompanied by a red warning LED. Once the flow has been reestablished, the
equipment will return to normal operation.
The "Flow Kit" (optional) is necessary to activate the flow sensor, which is
done by pressing OK in the menu Flow
Switch = Y.
Note: Password "1234" is required to modify this function.
4.1.4.8 Acid / Alkali
With this option you can select the type of pH corrector to be used in your
swimming pool.
Attention: It should be selected correctly otherwise the dosing system
will work opposite to expected.
81 / 95
Manual BSONE-EVO v.2