Publicidad
Idiomas disponibles
Idiomas disponibles
Model: 2102
Remove the shear pin and cotter pin from the front right
STEP 03
leg assembly�
Place the stabilizing shelf between the leg assemblies�
STEP 05
❶ ❶ Use one (1) large thumb screw
leg assembly�
❷ ❷ Use one (1) medium thumb screw
and secure the shelf to the right leg assembly�
❸ ❸ Use two (2) crossbar thumbscrews to attach the crossbar to the
rear leg assemblies�
Note: This shelf is integral to the stability of the appliance
while in use�
❶ ❶
With the help of another person, set the griddle body on
STEP 07
its feet�
Use one (1) M6x70 bolt
[e.]
and one (1) M6 nut
hook to the upper bar of the left leg assembly�
BLACKSTONEPRODUCTS.COM/SUPPORT
[m.]
to secure the shelf to the left
[l.]
to attach the lPG support
❸ ❸
❷ ❷
[j.]
to attach the lPG
ASSEMBLY GUIDE
Use the shear pin and cotter pin from the front left leg
STEP 04
assembly, and four (4) silver M6x12 bolts
to the front leg brackets�
With the help of another person, set the griddle body on
STEP 06
its side�
Use four (4) M6x12 bolts
[a.]
to attach the lPG insulation panel to the
bottom of the griddle base�
| OWNER'S MANUAL
[k.]
to attach the logo panel
07
Publicidad
