Blackstone PATIO 2152 Manual Del Propietário página 8

OWNER'S MANUAL | ASSEMBLY GUIDE
open the hood. With the help of another person, lift the
STEP 07
griddle top and take out the protective washers from the legs. Place
the griddle top on the main body by aligning the 4 pins to the holes
of the body.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place.
Use eight (8) M6x15 screws to install the four (4) side shelf
STEP 09
Place the two front pins into the
brackets. (one left shelf bracket (A) and one right shelf bracket (B)
front locking holes and push the
per side.)
griddle top and hood back. Then,
set the two rear pins into the
rear holes.
A A
B B
08
STEP 08
six (6) step bolts to attach the handle to the griddle hood.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place.
STEP 10
Place the two front pins into the
side shelf.
front locking holes and push the
griddle top and hood back. Then,
set the two rear pins into the
rear holes.
B B
STEP 11
A A
side shelf.
Insert the hood handle into the two (2) handle standoffs. Use
Screw two (2) M6 step bolts into the top holes of the left
Screw two (2) M6 step bolts into the top holes of the right
BLACKSTONEPRODUCTS.COM/SUPPORT
Model: 2152