Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth Instructions:
Set the function switch to the MP3/BT position. After hearing the Bluetooth prompting
sound, open the Bluetooth settings on your mobile device to search the J-220BT. Select
the option to connect. You will then hear a sound and see a light flash. Now you can select
music from your favorite music app.
USB/SD:
Insert a USB/SD Card in the corresponding port for music playback. The content will begin
playing automatically. Use the Forward and Rewind functions on the unit to navigate
through the .mp3 music.
Cassette Tape or Radio Recording to USB Drive or SD Card:
1. Set the function switch to the RADIO or TAPE position and select the desired radio
station or cassette tape audio/music track.
2. Insert the USB or SD card into the device.
3. Press the REC/DEL button located above the USB port to start recording. The
BT/REC/MP3 PLAY LED 1. indicator will turn red during recording.
4. Press the REC/DEL button again to stop the recording to USB or SD.
5. Set the function switch to BT/MP3 and the recorded file will start to play back.
J-220BT GUIDE
SETUP GUIDE
Step 1. Find the AC power cord to the J-220BT
located on the back panel of the unit.
Step 2. Find a power outlet (AC 120V/60Hz) and
connect the AC cord to the socket to supply the
unit with power.
Step 3. Move to the top of part of the panel and set
the switch to USB.
Step 4. Insert a USB flash drive in the USB port
located below the cassette compartment. The J-220BT
will automatically begin playing the .mp3 content.
Step 5. Use the Knob to adjust the Master Volume
to your taste.
Step 6. Press the Forward and Rewind keys to
move to the next track or previous track.
GUIA DE PREPARACION
Paso 1. Busque el cable de alimentación de CA al
J-220BT ubicado en el panel posterior de la unidad.
Paso 2. Busque una toma de corriente (CA 120
V/60 Hz) y conecte el cable de CA al enchufe para
suministrar energía a la unidad.
Paso 3. Vaya a la parte superior del panel y
configure el interruptor en USB.
Paso 4. Inserte una unidad flash USB en el puerto
USB ubicado debajo del compartimiento del
casete. El J-220BT comenzará a reproducir
automáticamente el contenido .mp3.
Paso 5. Use la perilla para ajustar el volumen
maestro a su gusto.
Paso 6. Pulse las teclas de avance y retroceso
para pasar a la pista siguiente o anterior.
Publicidad
