Descargar Imprimir esta página

QFX J-220BT Manual De Instrucciones página 7

Ocultar thumbs Ver también para J-220BT:

Publicidad

Idiomas disponibles

Idiomas disponibles

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS
SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING
TO A QUALIFIED TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or
operate this product near any liquids, heat sources such as radiators, heat registers or under
extreme weather conditions. Clean only with a dry cloth.
Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this
instruction manual and follow all precautions as they are stated.
_____________________________________________________________________________
PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO QUITE LA CUBIERTA DE
ESTE ALTAVOZ. NO HAY PARTES REPARABLES POR EL USUARIO ADENTRO. REMITIR
TODO SERVICIO A UN TÉCNICO CALIFICADO
Para evitar incendios o descargas eléctricas, no exponga este equipo a la lluvia ni a la humedad.
No almacene ni opere este producto cerca de líquidos, fuentes de calor como radiadores,
registros de calor o bajo condiciones climáticas extremas. Limpiar solamente con un paño seco.
Los usuarios deben mostrar una seguridad adicional cuando aparece el símbolo de ADVERTEN-
CIA o PRECAUCIÓN en este manual de instrucciones y seguir todas las precauciones tal como
se indican.
AC Operation
1. Before connecting the unit to an AC outlet, check the operating VOLTAGE of the unit
is identical with the VOLTAGE of your local power supply.
2. Connect the supplied AC power cord to the AC socket at the back of unit.
3. The battery will be automatically disconnected when the AC Power cord is plugged
into the socket.
Battery Operation
Unplug the AC cord from AC jack. This unit requires UM IX4 (not included), open battery
insert the batteries in the battery compartment at the downside of the unit, be careful of
position according to the notes. Close the battery cover.
Radio Operation
1. Select required band (FM/AM/SW1-SW2) with BAND selector
2. Select desired station by rotating the TUNING control
3. The built-in antenna is directional. When receiving FM or SW-1-SW-2 broadcast, pull
out the telescopic antenna in full length; the strongest reception can be achieved by
rotating and searching for the strongest signal.
4. Adjust VOLUME control to your listening preference.
5. To turn off the radio, set the function selector to TAPE (OFF) button. Listen with
headphones (not included).\For private listening, you can use headphones with the unit.
Connect the headphones (not included) to the headphone jack at the side of the unit.
The sound from the speakers automatically turn off when headphones are connected to
the unit.
WARNING!
¡ADVERTENCIA!
J-220BT GUIDE

Publicidad

loading

Productos relacionados para QFX J-220BT