Publicidad
Idiomas disponibles
Idiomas disponibles
English
Package content
• PCI Express card
• 2 x low profile bracket
• Driver CD
• User manual
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the card
Note:
• Maximum output power 23 watts at pin 1 and 9
An electrical short circuit or exceeding the maximum power of 23 W can destroy
the product or cause crashes or damage your system.
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the slot holder from the available PCI Express slot.
4.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
5.
Use a screw to attach the card to the housing.
6.
Reattach the housing and connect the power cord to the AC adapter.
7.
Switch on your computer.
Driver Installation
1.
Switch on your computer.
2.
The assistant for the Software Installation will appear. Click on "Cancel".
3.
Put the driver CD in the CD ROM drive.
4.
Navigate to the appropriate folder of your operating system under CD-drive\
Realtek\RTL8111 and choose "AX99100_Setup.exe".
5.
Follow the instructions of the driver installation.
6.
Restart the computer under Windows after installation of the driver.
7.
After restart you can start using the device immediately.
-3-
Publicidad
