Publicidad
Idiomas disponibles
Idiomas disponibles
_Cover
Knob
Priiiii_
Cartridge
COOLING
SYSTEM
Your engine is air cooled.
For proper
engine performance
and long life keep
your engine clean.
• Clean air screen
frequently
using a
stiff-bristled brush.
• Keep cylinder fins, levers, and linkage
free of dirt and chaff.
Muffler
Blower
Screen
MUFFLER
Do not operate tiller without muffler. Do not
tamper with exhaust system. Damaged
mufflers or spark arresters could create a
fire hazard. Inspect periodically and
replace if necessary. If your engine is
equipped with a spark arrester screen
assembly, remove every 50 hours for
cleaning and inspection.
Replace if
damaged.
SPARK
PLUG
Replace
spark plugs at the beginning of
each tilling season or after every 50 hours
of use, whichever comes first.
Spark plug
type and gap setting is shown in "PROD-
UCT SPECIFICATIONS"
on page 4 of this
manual.
TRANSMISSION
Once a season, lubricate the right hand
gear case grease fitting with 1 oz. of EP #1
grease.
CLEANING
Do not clean your tiller when the engine
and transmission
are hot. We do not
recommend
using pressurized
water
(garden
hose, etc.) to clean your unit
unless the gasket area around the
transmission
and the engine muffler, air
filter and carburetor
are covered
to keep
water out. Water in engine will shorten the
useful life of your tiller.
• Clean engine,
wheels,
finish, etc. of all
foreign
matter.
• Keep finished
surfaces
and wheels
free
of all gasoline,
oil, etc.
• Protect painted
surfaces
with automo-
tive type wax.
,_,CAUTION:
Disconnect spark plug wire
from spark plug and place wire where it
cannot come into contact with plug.
TILLER
TO ADJUST
HANDLE
HEIGHT
Select handle height best suited for your
tilling conditions.
Handle height will be
different
when tiller digs into soil.
1. First loosen
handle lock lever.
2.
Handle
can be positioned
at different
settings
between
"HIGH" and =LOW"
positions.
3.
Retighten
handle
lock lever securely
after adjusting.
Handle (Low)
Handle (High) Position
Handle Lock Lever
15
Publicidad
