Publicidad
Idiomas disponibles
Idiomas disponibles
The operation of any tiller can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tiller and while tilling. We recommend a wide
vision safety mask over spectacles or standard safety glasses.
HOW TO USE YOUR
TILLER
Know how to operate all controls before
adding fuel and oil or attempting to start
engine.
STOPPING
TINES AND DRIVE
1.
Release drive control bar to stop
movement.
2.
Move shift lever to "N" (neutral)
position.
ENGINE
• Move throttle control to =STOP" posi-
tion. If equipped with stop switch, move
switch to =STOP" position.
NOTE: Never use choke to stop engine.
Drive Control Bar
=ENGAGED" Position
Shift Lever
HARD TO SHIFT GEARS
• Briefly engage drive control bar and
release or rock tiller forward and
backward until are able to shift gears.
DEPTH
STAKE
The depth stake can be raised or lowered
to allow you more versatile
tilling and
cultivating, or to more easily transport
your tiller.
Shallowest Tilling ..........
(Cultivating)
Deeptest Tilling_
Depth Stake ------.
"Transport
Position
J
Drive Control Bar
"DISENGAGED"
Position
Throttle Control
TINE
OPERATION
-WITH
WHEEL
DRIVE
• Always release drive control bar before
moving shift lever into another posi-
tion.
• Tine movement is achieved
by moving
shift lever to (_) till position and
engaging drive control bar.
FORWARD
- WHEELS
ONLY/TINES
STOPPED
• Release drive control bar and move
shift lever indicator to =F" (forward)
position.
Engage drive control bar and
tiller will move forward.
REVERSE
- WHEELS
ONLY/TINES
STOPPED
1. DO NOT STAND
DIRECTLY
BEHIND
TILLER.
2. Release
the drive control
bar.
3. Move throttle control to "SLOW"
position.
4. Move shift lever indicator
to "R"
(reverse)
position.
5. Hold drive control bar against the
handle to start tiller movement.
TILLING
1. Release depth stake pin. Pull the
depth stake up for increased tilling
depth.
Place depth stake pin in hole
of depth stake to lock in position.
2.
Place shift lever indicator in till
position.
3.
Hold the drive control bar against the
handle to start tilling movement.
Tines
and wheels will both turn.
4.
Move throttle control to "FAST"
position for deep tilling. To cultivate,
throttle control can be set at any
desired speed, depending
on how fast
or slow you wish to cultivate.
IMPORTANT:
Always
release drive
control bar before moving shift lever into
another position.
Depth Stake Pin
"RELEASED" Position
\
Nut
=B"
Oute
Shield
"Locked"
Position
9
Publicidad
