FITFIU FITNESS BESP-X7 Manual Del Usuario página 50

USING THE PRODUCT
CONTROL PANEL
SPECIFICATIONS
- Time: 00:00-99:59 Min:Sec
- Speed: 0.0-99.9 Km/h
- Distance: 0-99.99 Km
- Calories: 0-999.9 Kcal
- Odometer: 0.00-999.9Km
- Pulse: 40-240 BPM
MODE:
the key allows you to select the concrete function of your
choice. If you select SCAN the display on the screen will change every
few seconds to show the different functions (Time, Speed, Distance,
Calories, Odometer, and Pulse).
AUTO ON/OFF:
To conserve power, t he monitor will automatically
shut off if there is no speed signal sensed or no key pressed in 4
minutes. The monitor will be auto-powered when the exercise begins
or at any key press.
TIME:
select this function by pressing the key repeatedly until you shall see TMR on the screen display. The total
working time will be shown when starting exercise.
SPEED:
select this function by pressing the key repeatedly until you shall see SPD on the screen display. The
Computer will display the current speed.
DISTANCE:
select this function by pressing the key repeatedly until you shall see DIS on the screen display. The
Computer will display each trip distance you have traveled.
CALORIES:
select this function by pressing the key repeatedly until you shall see CAL on the screen display. The
Computer will display total calories burns when starting to exercise.
ODOMETER:
select this function by pressing the key repeatedly until you shall see ODO on the screen display. The
total accumulateddistance will be shown.
PULSE:
select this function by pressing the key repeatedly until you shall see P on the screen display. The screen
display will then show the user pulse in real time.
RESET:
the equipment can be reset (to 0 values) by pressing the key MODE for 3 seconds or by changing the
batteries.
50