4.6
Attaching or Detaching the Wired Earpiece
Attaching the Wired Earpiece
Procedure:
Insert a wired earpiece to the audio connector jack.
Detaching the Wired Earpiece
Procedure:
Remove the wired earpiece from the audio connector jack.
Result: If your device is not connected to a Bluetooth accessory and you are not charging your device, the
device shows the following indications:
●
The device vibrates.
●
The top and bottom red crescent LED blinks alternately with the purple crescent LED.
4.7
Wearing Your Device
The device is designed to be worn on the body. A set of accessories offer comfortable and secure wearing.
MN010359A01-AA
Chapter 4: Getting Started
21