Motorola Solutions WAVE PTX TLK 25 Serie Guia Del Usuario página 35

● A tone sounds.
● The voice announcement sounds.
● The top crescent white LED blinks twice.
● There are no visible or audible indicators while the call is in progress.
When you receive an IPA when your device is in Do Not Disturb mode, your device shows the following
indications:
● A tone sounds.
● The voice announcement sounds.
● The top crescent white LED blinks twice.
NOTE:
● If you receive multiple IPAs from the same contact, there is only one entry in the IPA list with the
latest IPA at the beginning.
● The IPA List can store up to nine alerts.
● An IPA can be received from contacts outside your Contact List.
9.3
Browsing, Responding and Clearing IPA List
Procedure:
Perform one of the following actions:
Options
Browsing IPA List
Responding to IPA
Chapter 9: Instant Personal Alert
Actions
a. Press the Power button to enter the IPA List.
b. Press the Volume Up and Volume Down
buttons to scroll through the IPAs.
The voice announcement sounds the IPA
sender's alias and time the IPA was received.
a. Press the Power button to enter the IPA List.
b. Press the Volume Up and Volume Down
buttons to scroll to the selected IPA.
c. To call, press and hold the PTT button.
d. Wait for the Talk Permit Tone to end, and
speak into the accessory microphone.
e. To end the call to the IPA sender, release the
PTT button.
MN010359A01-AA
35