ATTACH THE DASH & STEERING WHEEL
1
1.
Plug the light unit connector on the
dash into light connector on the vehicle
body. Hide the pluged connectors into
the hole in the vehicle body.
2.
Fit the tabs on the dash into the holes
in the vehicle body, and push until you
hear it "click" into place.
3.
With a screwdriver loosen the screw on
the battery cover located in the center
of the steering wheel.
4.
Remove the battery cover from the top
of the battery compartment.
5.
Insert 2x1.5 AA batteries in their correct
polarities.
6.
Place the battery cover over the battery
compartment and fasten with the screw
you loosened in step one.
Please follow the steps 1-4 to add the batteries
(Not Included),
48
2
6
5
4
3