Injecta OLIMPIA Manual De Instalación página 3

OLIMPIA
Complete pump
Foot filter (Fig. 1-2)
Injection fitting (Fig. 3-4-5)
4 m of PVC hose (transparent and soft) for suction and for connecting the bleeding valve up for
manual priming (Fig. 6)
2 m of PE pipe (opaque and rigid) for connecting the pump's outlet to the injection point (Fig.
6)
Anchors for securing the pump.
Support for wall mounting
Instruction Manual
Power cable (2 m) with clamp and cable-holder
Fig. 1: Detergent and rinse- aid foot
filter
Fig. 4: Rinse-aid injection fitting
Cod. EM00136047_rev. 2.0
SYSTEM COMPOSITION
PACKING CONTENTS
OLIMPIA
Fig. 2: WT Foot filter
Fig. 5: WT Injection fitting
DosingPump.ir
1
Delivery connector
2
Suction connector
3
Priming valve
4
Knob for adjusting the frequency
5
Power supply input
6
Level sensor input
7 Wall mounting bracket
Fig. 3: Detergent tube holder
Fig. 6: Hoses (suction, delivery,
bleeding)
1