Descargar Imprimir esta página

Greencut BOS19000 Manual De Instrucciones página 35

Publicidad

Idiomas disponibles

Idiomas disponibles

Keep bystanders, children or animals away while operating this machine.
When the work is carried out simultaneously by two or more people, always check the location of the others and
keep a sufficient distance to ensure safety.
Keep the work area clean and work with sufficient lighting only.
ELECTRICAL SAFETY
Ensure that all power supplies comply with the equipment voltage requirements and that they are disconnected
before connecting or disconnecting the equipment.
When connecting electrically powered equipment, follow all electrical and safety codes.
Whenever possible, use a residual current device (RCD).
The earthed equipment must have an approved cable and plug and must be connected to an earthed outlet.
Always use the ON / OFF switch to connect and disconnect the machine. Do not operate the equipment by
connecting and disconnecting the power cable.
Do not use equipment that has exposed wires or broken switches.
Protect the product from damp and keep it away from extreme heat and cold.
Do not use electric cables to lift, move or transport the equipment.
Make sure that the electrical cables do not present a risk of tripping.
CARE, TRANSPORTATION AND STORAGE
Before use, inspect the equipment for any condition that may affect its operation. If it is damaged, have the
equipment repaired by the Official Technical Service before use.
Keep the pump, electrical cables and hoses in good working order.
Inadequate duty cycle can cause premature motor failure due to excessive heat.
Carry out periodic maintenance of the machine. Do not attempt any maintenance or repair work that is not
described in this manual. We recommend that maintenance and repairs not described in this manual be carried
out by the Official Technical Service.
Keep this machine out of reach of children.
SERVICE
Have the machine checked periodically by a qualified technician using only original spare parts. If you have any
questions, please contact the Official Technical Service.
35
EN

Publicidad

loading