Publicidad
Idiomas disponibles
Idiomas disponibles
EN Installation
Before starting operations in this section:
1.
A mobile air-conditioner shall be installed in
the flat and empty place all around.
2.
Find a place where there is power supply
nearby.
3.
Socket wiring should be in accordance with
the local electric safety requirements.
4.
Don't block the air outlet, and the required
distance around should be at least 30 cm.
5.
As shown in Fig. 1, install the exhaust hose,
and adjust the window position well.
Fig.1
Temporary installation
1.
Twist both ends of the exhaust hose into
the housing adaptor #10 and the window
connector #11. (clockwise)
2.
Insert the housing adaptor clip into openings at
back of the air conditioner (See Fig. 2) .
3.
Put the other end of the exhaust hose to the
near windowsill.
Fig.2
Clockwise
5063022060242_MNL_IN_V04.indd 58
5063022060242_MNL_IN_V04.indd 58
Window slider kit installation
The installation manner of window slider kit is mostly
in "horizontal" and "vertical", no much difference in
actual process.
As shown Fig. 3 and Fig. 3a, check the min. and
max. size of the window.
1
2
Aligning the
bayonet
down
Insert
58
3
Clockwise
Fig.3
Window width
min: 67.5 cm
max: 123 cm
Fig.3a
2
Window height
min: 67.5 cm
max: 123 cm
1
2
12-12-2022 16:08:10
12-12-2022 16:08:10
Publicidad
