Basics; Faceplate; Adjust The Volume; Change The Display Information - Kenwood KDC-X301 Manual De Instrucciones

BASICS

Faceplate

Volume Loading
knob slot
Detach button
the unit enters searching status.
Attach Detach
To
Turn on the power

Adjust the volume

Select a source

Change the display information*

* 1
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
* 2
For : You can also turn off the display information by pressing DISP repeatedly.
Display window
/ : Flashes when
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
2 Press DISP repeatedly. ( 30, 31)
Remote control (RC-406)
/
:
Lights up when
Bluetooth connection
is established. ( 16)
purchased remote control.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
1 ( Pressing SRC does not turn on the power. )
Press
• Press and hold
volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
Remote sensor (Do not expose to
bright sunlight.)
Pull out the insulation
sheet when using for the
first time.
: Can be remotely controlled with an optionally
: Remote control functions are not available.
or .
to continuously increase the
3
ENGLISH